Customer Hotline
+49 (0)351 / 2145 12 12
Einkaufsoptionen
What is the CAN bus?
Today's radio or navigation systems not only play back the music of the radio or navigation commands, but are also deeply networked with the vehicle's electronics. This communication structure, called CAN-Bus, connects ECUs, sensors, multimedia devices and much more.
Therefore, when replacing the factory radios / notifications, a vehicle-specific CAN bus adapter is required to maintain / keep the communication of all devices integrated in the CAN bus intact.
What can the CAN bus adapter do?
These active radio adapters are required in vehicles with CAN bus (also known as "GM Databus", "GMLan" or "LAN bus" for general engines) to exchange the standard radio or navigation system for an aftermarket device.
The adapters read the CAN bus, generate all required signals and control the original sound system with the audio signal of the new radio / navigation system. They are also required in many vehicles to connect the steering wheel remote control.
» Radio / Navi retrofit simple and fast: PAC RadioPRO 3 / 4 / 5 Serie
-
PAC OS-311B OnStar adapter for GM LAN 11bit vehicles with / without amplifier- Necessary when replacing the factory radio from an aftermarket radio / navigation system
- Simple Plug & Play installation thanks to pre-assembled cable set
- Holds a complete class 2 databus communication intact
- Situated beside ignition plus the following features still available:
- Emergency call system "OnStar" *
- BOSE sound / Amplifier System
- Warning & beeps
- Supports extended power (RAP)
- inclusive Antenna Adapter
179,00 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost in Dtl.A14445Delivery Time 6 - 9 Days* -
-36%Axxess AXDIS-TY1 CAN-Bus Adapter (Amplifier + SWC) for Lexus, Toyota 2004-2015- Necessary when replacing the factory radio / navigation device with a retrofit radio / navigation device
- Especially for selected Lexus, Toyota with amplifier system
- Keeps the CAN data bus communication intact
- Retains audio controls on the steering wheel
- Retains the factory AUX-IN jack
- Retains balance
- Provides accessory power (12-volt 10-amp)
- Plug&Play installation
- Always "up-to-date": software updates via micro-B USB port
Regulärer Preis 279,00 € Sonderpreis 179,00 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost 6,49 € in Dtl.A20229Delivery Time 1 - 4 Days* -
-25%Axxess AXTO-MI1 CAN-BUS Interface for Mitsubishi from 2006 to 2012 with original amplifier- Necessary when replacing the factory radio against a retrofit radio / navi
- Easy installation thanks to pre-assembled cable set
- Especially for vehicles with original factory amplifiers
- Keeps CAN data bus communication intact
- Continues to provide amplifier functions:
- Adjusting the fader
- Balance adjustment
- Eliminates "COM ERROR" message
Regulärer Preis 229,00 € Sonderpreis 171,75 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A18143Delivery Time 1 - 4 Days* -
CAN BUS Adapter incl. Warning Chimes & PDC for BMW 1, 3, X1, Z4 (from 2004) & Mini (2007-2014)- Necessary when replacing the factory radio from an aftermarket radio / -Navi
- Supported warning signals and PDC (front & rear)
- Issue warnings about external speaker
- Reads following CAN-BUS signals:
- + 12V switched battery (Cl. 15)
- Dashboard lighting (Cl. 58)
- speed
- Reverse
169,90 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost 6,49 € in Dtl.A17675Delivery Time 6 - 9 Days* -
-15%Axxess AXGM-04 CAN bus adapter for GM Class2 vehicles from 2000 (with / without OnStar)- Necessary when replacing the factory radio / -Navi against an aftermarket radio / navigation system
- Specially selected for GM Class2 vehicles with amplifier system
- Does the CAN databus communication intact
- Provides the following amplifier functions still available:
- High-level speaker input
- Adjusting the fader
- Balance adjustment
- Plug & Play installation
- Incl. Pre-wiring for optional steering wheel remote control adapter ASWC-1
- Always "up-to-date": software updates possible
Regulärer Preis 199,00 € Sonderpreis 169,15 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A17505Delivery Time 1 - 4 Days* -
PAC C2R-FRD1 CAN BUS Adapter for Ford, Lincoln & Mercury (from 2005)- Necessary when replacing the factory radio from an aftermarket radio / navigation system
- Holds a complete CAN bus communication intact
- Komptaibel with THX, SONY, Shaker & Audiophile amplifier systems
- Situated beside ignition positive following CAN bus signals are available:
- Reversing signal
- Hand / parking brake signal
- Gechwindigkeitssensor
- lighting
- Accessories Power Reserve / prolonged power (RAP)
- Station amplifier signal
- Rear- Seat entertainment appliances signal
159,90 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A12256Delivery Time 1 - 4 Days* -
PAC C2R-GM11 CAN-BUS Adapter for General Motors (11Bit LAN) without OnStar®- Necessary when replacing the factory radio from an aftermarket radio / navigation system
- Holds a complete CAN bus communication intact
- Situated beside ignition positive following CAN bus signals are available:
- warning tones
- Soundsystem- / amplifier switching
- Supports 10 min. Extended power (RAP)
- Preparation for steering remote control module
- Signal to all sound & amp systems
159,90 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A12805Delivery Time 8 - 11 Days* -
PAC C2R-CHY4 CAN-BUS Adapter for Chrysler, Dodge & Jeep with amplifier- Necessary when replacing the factory radio from an aftermarket radio / navigation system
- Holds a complete CAN bus communication intact
(optimally at workshop service or emission inspection) - Integrated connection for steering remote control modules PAC SWI
- Situated beside ignition positive following CAN bus signals are available:
- Reversing signal
- Hand / parking brake signal
- speed
- lighting
- Accessories Power Reserve / prolonged power (RAP)
- Station amplifier signal
159,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A14408Bitte Delivery Time erfragen -
-25%PAC RP4-FD11 CAN-BUS Adapter Set (C2R-FORD + SWI-RC) for Ford, Lincoln, Mercury with amplifier- Enables the exchange of factory radio and preservation of its functions of original steering wheel remote control.
- Steering wheel remote control in the interface already integrated.
- Controls (if available) to the car's amp via CAN bus
- Controls (if present) the on-board video entertainment system
- In addition to ignition plus with RAP (delayed disconnection) The following signals
- Speed signal,
- Hand brake signal,
- Reversing signal,
- instrument lighting
Regulärer Preis 199,00 € Sonderpreis 149,25 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A16614Bitte Delivery Time erfragen -
PAC C2R-Audi CAN-BUS Adapter for Audi (2005-2010)- Necessary when replacing the factory radio from an aftermarket radio / navigation system
- Holds a complete CAN bus communication intact
(optimally at workshop service or emission inspection) - Integrated connection for steering remote control modules PAC SWI
- Situated beside ignition positive following CAN bus signals are available:
- Reversing signal
- Hand / parking brake signal
- Gechwindigkeitssensor
- lighting
- Accessories Power Reserve / prolonged power (RAP)
- Station amplifier signal
149,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A15500Delivery Time 8 - 11 Days*
