Customer Hotline
+49 (0)351 / 2145 12 12
Einkaufsoptionen
What is the CAN bus?
Today's radio or navigation systems not only play back the music of the radio or navigation commands, but are also deeply networked with the vehicle's electronics. This communication structure, called CAN-Bus, connects ECUs, sensors, multimedia devices and much more.
Therefore, when replacing the factory radios / notifications, a vehicle-specific CAN bus adapter is required to maintain / keep the communication of all devices integrated in the CAN bus intact.
What can the CAN bus adapter do?
These active radio adapters are required in vehicles with CAN bus (also known as "GM Databus", "GMLan" or "LAN bus" for general engines) to exchange the standard radio or navigation system for an aftermarket device.
The adapters read the CAN bus, generate all required signals and control the original sound system with the audio signal of the new radio / navigation system. They are also required in many vehicles to connect the steering wheel remote control.
» Radio / Navi retrofit simple and fast: PAC RadioPRO 3 / 4 / 5 Serie
-
PAC RP4-CH11 CAN-BUS Adapter Set (C2R-CHY4 + SWI-RC) for Chrysler, Dodge & Jeep with amplifier- Enables the exchange of factory radio and preservation of its functions of original steering wheel remote control.
- Steering wheel remote control in the interface already integrated.
- Controls (if available) to the car's amp via CAN bus
- Controls (if present) the on-board video entertainment system
- Balance and fading are maintained (only for vehicles without amplifier!)
- Situated beside ignition positive with RAP (delayed disconnection) The following signals
- Speed signal,
- Hand brake signal,
- Reversing signal,
- instrument lighting
229,00 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost in Dtl.A16552Delivery Time 1 - 4 Days* -
Axxess AXGM-06 CAN bus adapter for Cadillac (1997-2005) with Bose system- Necessary when replacing the factory radio / -Navi against an aftermarket radio / navigation system
- Specially selected for Cadillac vehicles with Bose system
- Does the CAN databus communication intact
- Provides the following amplifier functions still available:
- High-level speaker input
- Adjusting the fader
- Balance adjustment
- Plug & Play installation
- Incl. Pre-wiring for optional steering wheel remote control adapter ASWC-1
- Always "up-to-date": software updates possible
219,00 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost in Dtl.A17466Delivery Time 15 - 18 Days* -
PAC RP4-VW11 CAN-BUS Adapter Set (C2R-VW + SWI-RC) for Volkswagen with amplifier- Enables the exchange of factory radio and preservation of its functions of original steering wheel remote control.
- Steering wheel remote control in the interface already integrated.
- Controls (if available) to the car's preamp via CAN bus
- Controls (if present) the on-board video entertainment system
- In addition to ignition plus with RAP (delayed disconnection) The following signals
- Speed signal,
- Hand brake signal,
- Reversing signal,
- instrument lighting
219,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A16616Delivery Time 8 - 11 Days* -
PAC GM1A-RS CAN-BUS Adapter Set for General Motors (with Class2) without OnStar - RP4-GM11 Upgrade- Enables radio replacement and retains steering wheel controls functions
- Steering wheel remote control adapter already integrated
- Controls (if available) the vehicle's Bose amplifier via CAN bus
- Controls (if available) the on-board video entertainment system
- Warning chimes through external speaker
- Includes LOC-1 High-Low Converter
- Setting the audio fading via App
- USB updateable
209,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A20109Delivery Time 11 - 14 Days* -
Axxess AXTO-MI3 CAN-BUS Adapter for Mitsubishi from 2014 with Rockford Fosgate Amp- Necessary when replacing the factory radio from an aftermarket radio / navigation system
- Easy installation thanks to pre-assembled cable set
- Especially for vehicles with Rockford Fosgate Amp
- Does the CAN databus communication intact
- Provides amplifier functions still available:
- High-level speaker input
- Adjusting the fader
- Balance adjustment
- Incl. Pre-wiring for optional steering wheel remote control adapter ASWC-1
- Adapter always "up-to-date" on micro-B USB Port
209,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A17240Delivery Time 8 - 11 Days* -
PAC RP4.2-BM21 CAN-BUS Interface Set for BMW 1, 3, 5, 6, M5, M6 2006-2015- Allows you to swap the factory radio
- With receipt of the following functions:
- Original steering wheel remote control
- Factory amplifier (non fiber optic)
- i-Drive control
- Warning chimes (including rear park assist and front collision detection)
- Steering wheel remote control adapter already integrated in the interface
- Controls (if available) the vehicle's own amplifier via CAN bus
- Provides the following signals in addition to ignition plus:
- speed signal, reversing signal, handbrake signal, illumination
199,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A19404Delivery Time 8 - 11 Days* -
PAC RP4.2-MB11 CAN-BUS Interface Set for Mercedes Sprinter (2014-2018)- Allows you to swap the factory radio
- With receipt of the following functions:
- Original steering wheel remote control
- Factory AUX-In 3.5mm jack
- Factory USB port
- Factory rear view camera
- Steering wheel remote control adapter already integrated in the interface
- Provides the following signals in addition to ignition plus:
- speed signal, reversing signal, handbrake signal, illumination
199,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A19405Delivery Time 8 - 11 Days* -
PAC RP4-GM32 CAN-BUS Interface set for Chevrolet, GMC with GM LAN 29 bit- Allows you to swap the factory radio and preserve the functions of the original steering wheel remote control
- Steering wheel remote control adapter already integrated in the interface
- Controls (if available) the vehicle's own amplifier via CAN bus
- Controls (if available) the on-board video entertainment system
- In addition to ignition plus RAP (delayed switch-off) the following signal
- Speed signal,
- Hand brake signal,
- Reversing signal
- instrument lighting
199,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A19733Delivery Time 11 - 14 Days* -
Axxess AXGM-13 CAN-Bus-Adapter for Cadillac STS 2005-2011- Necessary when replacing the factory radio / navigation device
- Receives OnStar & OEM Bluetooth
- Keeps the CAN data bus communication intact
- Continues to provide the following functions:
- Retained accessory power (R.A.P)
- Fade settings
- Balance settings
- Plug&Play installation
- Incl. pre-wiring for optional steering wheel remote control adapter ASWC-1
- Always "up-to-date": software updates possible
199,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A20169Delivery Time 11 - 14 Days* -
PAC RP4 GM11 CAN-BUS Adapter Set (C2R-GM24 + SWI-RC) for General Motors (with Class2) without OnStar- Enables the exchange of factory radio and preservation of its functions of original steering wheel remote control.
- Steering wheel remote control in the interface already integrated.
- Controls (if available) to the car's amp via CAN bus
- Controls (if present) the on-board video entertainment system
- Situated beside ignition positive with RAP (delayed disconnection) The following signals
- Speed signal,
- Hand brake signal,
- Reversing signal,
- instrument lighting
199,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A17089Bitte Delivery Time erfragen
